帝舵指针掉落

       帝舵指针掉落，今天北京帝舵维修中心为大家解答。我们的指针岁岁年年一圈一圈的不停转为我们工作，为我们提供时间的信息，为我们的生活带来便利。但如果遇到意外冲击，指针就不会坚持在工作岗位之上了。接下来北京帝舵维修服务中心就为大家介绍一下帝舵手表指针掉落怎么办。

       The rudder pointer fell. Today, Beijing rudder maintenance center will answer for you. Our hands turn round and round year after year to work for us, provide us with time information and bring convenience to our life. But if there is an unexpected shock, the pointer will not stick to the job. Next, Beijing Imperial rudder maintenance service center will introduce how to handle the drop of the pointer of imperial rudder watch.

       一、帝舵手表的指针一旦掉落需要注意什么?

       1、 What should we pay attention to once the pointer of the imperial watch falls?

       1、为防止指针刮擦表光盘或损坏指针，请立即拉动表手柄并停止表指针的移动。

       1. In order to prevent the pointer from scratching the meter disc or damaging the pointer, please pull the handle of the meter immediately and stop the movement of the pointer.

       2、帝舵手表的镂空部分，所以要特别注意，以免小针落在后面。

       2. It's the hollow part of the imperial watch, so pay special attention to it to avoid the small needle falling behind.

       3、从帝舵手表上取下表后，请在一定时间内要求维修，因为灰尘可能会粘附在帝舵手表上或损坏机芯。

       3. After removing the watch from the imperial watch, please ask for repair within a certain period of time, because dust may adhere to the imperial watch or damage the movement.

       二、帝舵手表指针掉落后怎么办？

       2、 What to do after the pointer of emperor's watch drops?

       据说之所以掉针，是因为该手不在同一个面，而是安装在单独的位置上，并且秒针连接到轮管，但是在大多数情况下，秒针掉落了。如果指针表的指针关闭，则必须及时拉表柄头以停止移动走，以防止指针刮擦表蒙、表光盘或使其自身断裂。表取下柄头后，及时修理指针表，以免灰尘。在正常情况下，如果帝舵手表的内部没有损坏，则维修相对容易，并且如果轮管变形或损坏或零件磨损，则维修将更加困难。

       It is said that the reason for the drop of the hand is that the hand is not on the same side, but is installed in a separate position, and the second hand is connected to the wheel tube, but in most cases, the second hand falls. If the pointer of the pointer meter is closed, the handle of the meter must be pulled in time to stop moving, so as to prevent the pointer from scratching the watch cover, the watch disc or breaking itself. After the handle is removed, the pointer meter should be repaired in time to avoid dust. Under normal circumstances, if there is no internal damage to the rudder watch, the maintenance is relatively easy, and if the wheel tube is deformed or damaged or parts are worn, the maintenance will be more difficult.

       在安装表机针之前，您需要做作业并选择专业且定期的北京帝舵维修服务中心，以免非内部专家刮擦表光盘。这会降低表的防水性能。安装表针时，请在表光盘上放一层薄膜以保护表光盘。安装表针后，需要进行全面的防水测试，如果防水环老化，则必须更换。

       Before installing the needle, you need to do your homework and choose a professional and regular Beijing Dili maintenance service center to avoid non internal experts scratching the table disc. This reduces the water resistance of the watch. When installing the watch pin, please put a layer of film on the watch disc to protect the watch disc. After the installation of the watch needle, a comprehensive waterproof test is required. If the waterproof ring is aging, it must be replaced.

       以上就是本篇文章的全部内容了，希望您在阅读完以后可以学到一些方法并掌握和应用在日常中。若您的帝舵手表在使用过程中出现了什么问题或是需求，都可至北京帝舵维修中心，我们将竭诚为您服务。

       The above is the whole content of this article, I hope you can learn some methods and master and apply them in daily life after reading. If there is any problem or demand in the use of your rudder watch, you can go to Beijing rudder maintenance center, and we will serve you wholeheartedly.

本文链接： http://www.beijing-tudor.com/vcsj/63.html